PolyDyn 2A Gun Oil in Action
First video shows how easy the bolt carrier group cleans up in an AR platform rifle using 2A 2nd Amendment Gun Oil. The rifle had 120 rouds through it and then sat exactly two weeks before the video, the bolt carrier has been coated by PolyDyn Performance Coatings and the bolt and extractor are both stock Mil-Spec. The entire BCG was able to be cleaned with nothing but  a microfiber cloth, no need to scrape the nose in front of the gas rings.

SECOND VIDEO shows a brand new Ruger Precision Rifle with the Slip 2000 EWL gun oil they use from the factory and suggest as their prefered gun oil. First part of the video shows the amount of force it takes to close the bolt with the Slip 2000 EWL oil on the bolt, second part of the video shows the improvement the PolyDyn 2A Gun Oil made.  The measurements were made using a Lyman Trigger Pull Guage and it shows dropping the pressure needed to close the bolt by 10oz in the first four pulls with the trigger gauge.
2A Gun Oil vs Tactical Honey

This video shows how  2A second amendment gun oil compares to Tactical Honey. As with the video testing Slip 2000 EWL oil the result was exactly the same...2A lowered the pressure to close the bolt by 10oz useing the Lyman trigger pull gauge to perform the test.  2A  Gun Oil is simply the best on the market, PolyDyn litterally reinvented the concept of gun oil.
 

2A Gun Oil vs 8 Others Hot Test
This was a test with 2A 2nd Amendment Gun Oil vs 8 other brands and types to test how well they hold up to the heat that generates on a firearm.  2A gun oil can be used on any firearm including full auto in any enviroment .

2A will not break down under any condition from extreme cold to extreme heat, it does not dry, gel, dissipate or change state in any way...no matter what you throw at it 2A just keeps working.

In the video 2A is added first so it is in the pan the longest and still does not break down and in the end it was able to be scooped from the pan and applied directly to bare fingers and not burn the skin, thats because 2A stays cooler than the hot surface it is applied to which keeps your gun cooler as well.

DO NOT TRY THIS AT HOME
THIS TEST WAS DONE UNDER  CAREFUL AND
PROPER CONDITIONS WITH PROPER VENTILATION,
FIRE EXTINGUISHER AND OTHER SAFETY DEVICES ON HAND!

NOT RESPONSIBLE FOR ANY INJURIES OR DAMAGE DUE TO
ANY PERSON TRYING TO REPEAT THIS TEST OR ANYTHING
SIMILAR